Xhorse Multi-Prog is the second generation of VVDI Prog programmer. Multi-Prog will Read, Write and Clone ECU, Read, Write and Clone TCU, Read and Write MCU, Read and write IMMO module, read and write eeprom, read and write vehicle dashboard.
Lifetime Free Update Online.
The XDMPG0GL Multi-Prog ECU Programmer is a versatile tool meticulously designed by Xhorse to access and modify crucial data stored in a vehicle's Engine Control Unit (ECU) and Transmission Control Unit (TCU). From engine maps to transmission parameters and immobilizer settings, the XDMPG0GL ECU Programmer empowers users with unprecedented control and customization.
Multi-PROG Pro-level programmer supports batch writing of chips, and batch writing of chips is often used in factories when production requires large-scale writing of chips. The types of writes supported are common memory series and common microcontroller series. For the specific usage of batch writing, please refer to the documentation of the factory usage mode that comes with the software.
Batch programming function: Multi-PROG devices support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be realized. The main difference between Xhorse VVDI PROG programmer and Xhorse MULTI-PROG Pro-level programmer is that MULTI-PROG Pro-level programmer has the batch programming function but VVDI PROG programmer does not
Xhorse Multi-Prog Programmer ECU Programmer
TOP 7 Reasons to Get Xhorse Multi-Prog:
1. Built-in update software: Make Multi-Prog firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed
7.Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
Language: English
Database update online
What is the new feature of Multi-Prog?
Multi-Prog is with MQB48 license, bind with Xhorse VVDI2/ key tool plus account, then your Key Tool Plus/ VVDI2 can use MQB48 function.
Full replace VVDI Prog Programmer.
Newly support ECU TCU Clone.
1. Read, Write and Clone ECU
for BMW B48/ B58 reading ISN
for BMW MSD80/ 81/ 85/ 87/ MSV90
for Mercedes-Benz SIM271
for BMW MSV80
for VW B-OSCH MED17 Series ECUo for BMW N13/ N20/ N55/ B38/ TC17X
Support for M-arelli.S-iemens.D-elphi and other ECU manufacturers
2. Read, Write and Clone TCU
for Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
for Porsche DL501 TCU
for Ford Dodge and other MPS6 series TCU
for BMW DKG, for Mercedes-Benz VGS and other models TCU
3. Vehicle Engine Data Calculation and Processing
MED17/ EDC17 data processing
4. Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services
5. Read Write MCU
Support reading and writing MCU of various brands including R-enesas, M-otolora, NXP, I-nfineon, etc.
Support certain encrypted chip reading and writing
6. Read Write Vehicle Immo Module
Support for Porsche, for LandRover, for Mercedes-Benz EZS, for VOLVO, for VW MQB dashboard, for AUDI BCM2,etc.
Support modules including for BMW EWS, CAS1/ CAS2/ CAS3/ CAS4+, FEM BDC.etc.
Support other common immo modules
Note: Compatible withXhorse solder-free adapters and cables
7. Read & Write EEPROM
Support EEPROM and FLASH
8. Read Write Vehicle Dashboard
Support dashboard for VW, for Honda, for Hyundai, Kia .etc.
Xhorse Multi-Prog Hardware Display:
Xhorse Multi-Prog Software Display:
Product Showcase
Xhorse Multi Prog ECU and TCU List (Keep Updating)
